Construction

Social media for protective coating and sealant applicators, sorted.

A month of posts written for your line of work: the caption, the hashtags, what to photograph and the day to post. Answer six questions and the first month is free.

Get my free plan

Where your plan focuses

The platform and content mix SahiPost starts from for this trade. It is a starting point, not a rule.

Platforms

Instagram20%
Facebook15%
LinkedIn65%

What you post

Teach45%
Engage15%
Build trust30%
Sell10%

A sample post

This is the kind of post that lands in your plan, here for Instagram.

A SahiPost poster for protective coating and sealant applicators, made from the post "Myth: The coating product decides everything.", with the business name, phone number and logo along the bottom
The poster SahiPost made for this post.

Myth: The coating product decides everything. Fact: Surface preparation decides most of it. The best coating fails on a poor surface.

#industrialcoatings #epoxyflooringindia #surfacepreparation #factoryflooring

Photo brief. Split card: a peeling coating on dusty concrete labelled MYTH, a ground and primed surface with a fresh glossy coat labelled FACT.

Myths your customers believe

Posts that correct a myth earn trust. Your plan includes them, with your business name attached.

Myth. The coating product decides everything

Fact. Surface preparation often decides success. Even the best coating fails on a poorly prepared surface.

Myth. One coat is enough

Fact. Systems usually need primer, intermediate and top coats at specified thicknesses.

Myth. Epoxy works everywhere

Fact. Epoxy suits many indoor floors but can chalk in sunlight. Exteriors may need PU or other systems.

Myth. Coatings can be applied in any weather

Fact. Humidity, temperature and surface moisture affect curing and adhesion.

How to make a coating last

  1. Prepare the surface thoroughly
  2. Apply the full system at specified thickness
  3. Allow proper curing before use

Questions your customers ask

Which coating do I need?

It depends on the surface, exposure, chemicals and traffic. We assess the site and recommend a system.

How long does application take?

It depends on area, preparation and curing times. We plan around shutdown windows where needed.

Do you prepare the surface?

Yes. Grinding, shot blasting or cleaning, plus repairs, are part of our scope.

Is there a warranty?

Warranty depends on the system and conditions and is stated in writing.

Can you coat in occupied factories?

Yes, with phased work, ventilation and safety measures agreed in advance.

Do you test the coating?

We check thickness and adhesion as per specifications.

Hashtags to start with

Ready for a month of posts?

Six questions, about two minutes. No card, and the first month stays free.

See my free plan

Similar businesses